ARM RealView Integrator Compact Platform
Compact Development board with LCD and ethernet
The ARM RealView Integrator Compact Platform is a compact development board which supports up to 1 core module and up to 3 logic modules. It provides connectors for a number of useful perpherals which are mostly implemented as Primecell peripherals on the core module.
The Integrator/CP provides connectors for LCD, touch screen, VGA, Multi-Media Card (MMC), audio codec and 10/100 ethernet using the SMSC91x chip.
Main Features
The ARM RealView Integrator relies on a core module which provides up to 256 MB of SRAM and up to 1 MB of ZBT SRAM. The core module also provides the following Primecell peripherals:
- PL011 UART
- PL050 keyboard and mouse interface
- PL030 real-time clock
- PL181 MMC interface
- PL110 colour LCD controller
- PL041 advanced audio codec interface
The /CP board provides the following connectors and features:
- 16 MB NOR flash
- Multi-media card socket
- Connectors for DB9 serial, keyboard, mouse
- LCD and touchscreen interface connector
- LED character display
- 4-way DIL switch and 4 status LEDs
- RJ-45 Ethernet socket (10/100 MBit)
- MMC socket
- Audio line level input and output with microphone and headphone amplifier
- 8-bit GPIO
Operating System Support
The Integrator/CP supports ARM Embedded Linux, SymbianOS, WindowsCE and other RTOSs. The U-boot boot loader also supports Integrator/CP.
The ARM Firmware Suite is provided with the board, as well as FPGA files for the primecell peripherals mentioned above.
Core Modules Supported
Integrator/CP supports the following core modules which can be purchased separately:
- CM920T
- CM922T-XA10
- CM926EJ-S
- CM946E-S
- CM966E-S
